Zalman CNPS2X

120W powerful cooling

Tiny 120W class cooler applied the DTH, S bending technology and the optimal heat dissipation design.

Emit the air straight from the fan to the mother board through down blowing design, it cools down not only the CPU but also the components around it.  

• A : Regular heatsink heat transfer
• B : FHS(Flower Heat Sink) type heatsink

transfers heat efficiently.  

DTH technology applied

Direct Touch Heatpipe (DTH) Base technology transfers the CPU’s heat directly to heatpipes, thereby minimizing heat resistance and maximizing cooling performance.   'S' bending technology applied

Connect all the fins on one heatpipe using ’S’ bending technology to maximize the cooling effect.  

Optimized fin structure

Fin design that is optimized for heat dissipation via a small, lightweight for most efficient cooling performance.   80mm PWM fan

Equipped with a low-noise 80mm PWM fan, user can control the RPM to achieve high performance / low noise depending on the CPU temperature.  

Light compact size

High-performance, ultra-compact, light weighted. It can be mounted in all cases including mini-ITX case.  

ZM-STG2M provided

The high performance super thermal grease ZM-STG2M maximizes heat transfer from the CPU to the base of CNPS2X for intensified cooling performance.  

Wide compatibility

CNPS2X accommodates a broad range of sockets.

• Intel LGA115X
• AMD AM3+/AM3/FM2+/FM2/AM2+/AM2

Manufacturer

Socket

CPU

CPU Compatibility

Intel 1156

Core i7

Supports all speeds

Core i5

Core I3 1155

Core i7

Supports all speeds

Core i5

Core i3 1151

Xeon E3

Supports all speeds

Core i7

Core i5

Core i3 1150

Xeon E3

Supports all speeds

Core i7

Core i5

Core i3

AMD

AM4

Ryzen 7

Supports all speeds (Socket AM4 mounting kit Inquiry)

Ryzen 5

Ryzen 3

A12

A10

A8

AM3+

FX

Supports all speeds

AM3

Phenom? X6

Supports all speeds

Phenom? X4

Phenom? X3

Sempron

Athlon? X3

Athlon? X2

FM2+

A10

Supports all speeds

A8

A6

Athlon X4

FM2

A10

Supports all speeds

A8

A6

A4

AM2+

Phenom X3

Supports all speeds

AM2

Athlon64 X2

Supports all speeds      

Dimensions 84(L) x 84(W) x 27(H)mm

Weight 83g

Materials

Pure Copper & Aluminum

Dimensions 80mm

Bearing Type

Long Life Bearing

Adjust Fan Speed

PWM (Pulse Width Modulation)

Fan Speed 1,500 ~ 2,600 rpm ± 10%

Noise Level 17.4 ~ 22.7 dBA ± 10%

Rate Voltage 12V    

Color

Gray

Capacity 1g

Temperature Stability -40°C ~ +150°C (-40? ~ +302?)  

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.    

Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.  

To prevent possible injuries, gloves must be worn while handling this product.  

Excessive force exerted on the fan may cause damage to the fan and/or system.  

Use and keep product away from reach of children and pets.  

Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.  

Zalman is not responsible for any damages caused by overclocking.  

During transportation of the system, the cooler must be removed.  

Zalman is not responsible for any damages that occur during the transport of a system.  

Product design and specifi cations may be revised to improve quality and performance.

Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users' responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs)